Konica Minolta 7130 - Manual (Page 124)

6-2
Main Body Specifications
Product Name Konica 7022/7130/7135
Configuration Semi-console with stationary platen
Photoreceptor OPC drum
Method Laser Electrostatic
Toner Black, cartridge type
Recommended Operating Environment 50°~86°F (10°~30°C), 10~80% RH
Warm Up Approx. 30 seconds @68°(20°C), 50% RH
Auto Reset Off/30 sec./1 min./1.5 min./2 min./2.5 min./3
min./3.5 min./4 min./4.5 min./5 min.
First Copy Out Time From Platen Glass:
7022/7130: 5 sec. for 8.5”x11”
7135:
4.2 sec. for 8.5”x11”
Copy Rate 7022: 22 cpm: 8.5”x11”, 5.5”x8.5”R
18 cpm: 8.5”x11”R
16 cpm: 8.5”x14”
14 cpm: 11”x17”
7130: 30 cpm: 8.5”x11”, 5.5”x8.5”R
20 cpm: 8.5”x11”R
17 cpm: 8.5”x14”
15 cpm: 11”x17”
7135: 35 cpm: 8.5”x11”, 5.5”x8.5”R
21 cpm: 8.5”x11”R
16 cpm: 8.5”x14”
15 cpm: 11”x17”
Continuous Copy 1~999 copies
Voltage 120V/12A
Frequency 60Hz
Grounding Isolation recommended
Power Consumption Max. 1,170 VA (full option)
Noise Level (full system) Approx. 66 dB (A) or less, during copying
Automatic Modes AMS, AES (plus 9-level manual density),
APS detects 11”x17”, 8.5”x14”, 8.5”x11”R,
8.5”x11”, 5.5”x8.5”R
Magnification Presets: 0.50, 0.65, 0.77, 1.29, 1.55, 2.00
3 User Sets - 0.25~4.00, set by key operator
Zoom range - 0.25~4.00 in 1% steps
Originals on Platen Max. size: 11”x17” (280 mm x 432 mm)
These specifications are subject to change without notice.