Konica Minolta 7130 - Manual (Page 225)

10-5
Inserting a New Staple Cartridge into FS-107 Finisher
Follow the procedure below to replace the staple cartridge.
Reminder!
Use only the staples supplied by Konica. To purchase, please contact your
service representative.
1.
Press [OUTPUT] on the control panel to display the Output Mode
Screen.
2.
Touch STAPLE SET to display the Staple Position Selection Screen.
3.
Touch ADD STAPLE.
The Moving Stapler Screen will be displayed while the stapler deeply positioned
inside the finisher moves toward the finisher front door.
2 3 1
5 6 4
8 9 7
0
CLEAR QTY.
STAR
CHECK
HELP
AUTO RESET
OUTPUT
APPLICATION
SCANNER / PRINTER FAX
DATA
INTERRU
10
Maintenance
& Supplies
Service, Repairs,
Supplies
Checking
Copy Count
Cleaning
Printning
Section
Cleaning
Scanning
Section
Inserting New
Staple Cartridge
Adding Toner