Konica Minolta 7130 - Manual (Page 261)

[4] E.C.M. (Electronic Copy Monitor) (continued)
11-25
[4] ECM On/Off Setting
Use this function to turn ECM ON or OFF. If the machine has the optional Fax kit and
Printer Controller installed, set ECM ON or OFF individually for COPIER, FAX, and
PRINTER mode.
NOTE:
If ECM OFF is selected while ECM functions, the copier will be enabled to
perform copying jobs without an ECM password entered, and both copy
count and copy limit functions will be discontinued.
❒ Default setting: ECM on
ECM Setting Menu Screen ECM On/Off Setting Screen
(machine without Fax kit and Printer Controller)
ECM On/Off Setting Screen
(machine with Fax kit and Printer Controller)
Procedure
1 Touch 4. ECM On/Off setting on the ECM Setting Menu Screen to display the ECM
On/Off Setting Screen.
2 Touch ON to activate ECM or touch OFF to de-activate ECM.
The selected key will be highlighted.
3 Touch OK to complete the settings and return to the ECM Setting Menu Screen.
If other ECM setting changes are required, touch the desired key.
4 Touch RETURN to restore the Key Operator Mode Screen.
5 Touch RETURN to restore the Basic Screen to perform copying operations.
11
Key Operator
Mode
KRDS Host
Density Shift
Application
Customize
List Print
Memory
Switch
Power Save
Touch Panel
Adjustment
Weekly
Timer
Key Operator
Data
Panel Contrast
Paper Type
Lock Job
Memory
E.C.M.
Preset Key
Copier Initial
System Initial
Key Operator
Mode