Konica Minolta 7130 - Manual (Page 39)

2-9
Turning On the Power Switch
To Turn On the Power
1.
Turn ON the main power switch.
The main power switch is located on the rear left side of the main body.
Reminder!
When turning the main power switch OFF then ON, wait for 3 seconds or
longer before turning it ON again; otherwise the copier may not function
normally.
2.
Turn ON the power switch.
The power switch is located on the far left side of the control panel.
Warm-up takes approximately 30 seconds..
2
Machine
Information
Machine
Configuration
Turn On/Off
the Power
Loading
Paper
Changing
Paper Size