Kodak DP1050 - Manual (Page 32)

Contents
32
7.3.2 Picture positioning
Picture positioning
Adjust vertical and horizontal position of the picture on
the screen with the two sliders.
Select OK to save your changes and exit, or select
Cancel to exit without saving your changes.
7.3.3 Audio control
Audio control
Select this function when you have connected an audio
signal to the ‘Audio in’ on the KODAK DP1050 ULTRA
connectors (or through the EVC cable). Use the four
sliders to adjust volume, bass, treble and balance until
you have a satisfying sound.
Select Internal Mute to mute the internal speakers.
Select External Mute to mute the external audio output.
Select OK to save your changes and exit, or select
Cancel to exit without saving your changes.
Selecting Default restores factory settings.
1332 (ELEK). KODAK ENG 15.07.98 13:33 Side 32