Kodak DCS Pro 14n - Manual (Page 107)

Setting up Cards, Folders, and Files
April 29, 2004 6-15
Correcting Digital
Exposure Use Digital Exposure Correction to correct errors in exposure.
This feature helps correct errors but is not a substitute for proper exposure
settings (shutter speed, aperture, and ISO).
NOTE: Digital Exposure Correction is not to be confused with Exposure
Compensation (see page 7-19 ) which modifies exposure.
Digital Exposure Correction is applied to JPEG images on the camera. It is
not applied to Raw images on the camera. Rather, the information is saved
and applied when the images are processed in the DCS Photo Desk
software. (You can also change the setting in the DCS Photo Desk
software.)
1. Choose Digital Exp. Cor. from the Image menu, then highlight Off or
On.
2. Press the OK button.
Exposure Bias You can fix under- or over-exposed images by setting the Exposure Bias
(-0.3 to +0.3 in 1/10 stop increments).
Exposure Bias is applied to JPEG images on the camera. It is not applied to
Raw images on the camera. Rather, the information is saved and applied
when the images are processed in the DCS Photo Desk software. (You can
also change the setting in the DCS Photo Desk software.
1. Choose Exposure Bias from the Image menu, then highlight the
desired setting.
2. Press the OK button.