Kodak DCS Pro 14n - Manual (Page 202)

A-4 April 29, 2004
Specifications
Host interface IEEE 1394 (single 400 MB/s port, 1394a-2000 small form factor
interconnect)
Accessory interface NIKON 10-pin compatible accessory interface
Removable storage 1 Type II CF+ compatible CF card, 1 SD/MMC card
Orientation sensor Detects ±90° rotation about optical axis
Host software KODAK PROFESSIONAL DCS Photo Desk, KODAK PROFESSIONAL DCS
Camera Manager, KODAK PROFESSIONAL Extended Range Imaging File
Format Module
Lens aperture Instant-return type with Depth-of-Field Preview button
Built-in Speedlight Activated by pressing the Speedlight Lock-Release button, guide number 12
(at ISO 100, m), flash coverage 28 mm or longer lens, ISO range 80 - 800
Flash control Controlled by 5-segment TTL Multi Sensor
Flash Sync mode Front-Curtain Sync, Red-Eye Reduction, Red-Eye Reduction with Slow Sync,
Slow Sync, Rear-Curtain Sync
Red-eye reduction Yes (AF assist lamp)
Ready light Lights up when flash is fully charged with built-in Speedlight
PC Sync Terminal For attaching optional Speedlight
Drive mode Single frame or Continuous shooting
Date and time Date and time is associated with each image file. Can be reset.
Power source KODAK PROFESSIONAL DCS Pro Battery or KODAK PROFESSIONAL DCS Pro
Charger / AC Adapter
Power switch Power On and Off positions
Exposure meter Shuts off automatically after 8 seconds if no operations are performed.
Activated by lightly pressing the Shutter Release button.
Battery power confirmation In Top Status LCD when Exposure meter is on
Tripod socket 1/4 inch (JIS standard)
Two-Button reset Reset to factory settings