Kathrein VGP 9033-1G/9041 - Manual (Page 9)

1 1
HTE 10 - Hand-held unit
With the HTE 10 hand-held unit one is able to adjust
correspondingly equipped devices on site. Using the
'Up' and 'Down', 'Menu' and 'Enter' buttons, one is able
to change and set the values on the 4-line display. The
display is illuminated and easy to read.
Accessories
Monitoring transponder HMS protocol,
frequency-agile
TVM 1000 - Monitoring transponder DOCSIS/
EuroDOCSIS, frequency-agile
Type TVM 850/H
Order no. 26210077
Input frequency range MHz 75-90.5
Input level range dBµV 50-95
Output frequency range MHz 5-42
Max. output level dBµV 105
Power consumption W 1
Transmission protocol HMS
Suitable for
VGO 939, VGF 939, VGO 939-1G, VGF 939-1G, VOS 952/953, VOS 952-1G,
VOS 953-1G, ORA 9022, ORA 9022-1G, ORA 920/921, VGP 9033,
VGP 9033-1G, VGP 9041, VGF 9030/9040
Type TVM 1000
Order no. 26210086
Input frequency range MHz 90-862
Input level range dBµV 48-78
Output frequency range MHz 5-65
Max. output level dBµV 113-118
Power consumption W 3.5
Transmission protocol DOCSIS/EuroDOCSIS 2.0
Suitable for
VGO 939, VGO 939-1G, VGF 939, VGF 939-1G, VOS 952/953, VOS 952-1G,
VOS 953-1G, ORA 9022, ORA 9022-1G, ORA 920/921, VGP 9033 as of version A03
(Nov. 2008), VGP 9033-1G, VGP 9041 as of version A02 (Nov. 2008), VGF 9030/9040
• Monitoring transponder for compact amplifiers, house connec-
tion amplifiers and optical compact receivers (see table)
• Monitors various parameters such as voltage, current drain and
internal temperature
• Controls the Ingress Control switch in correspondingly equip-
ped devices
• Transmission in the HMS protocol
• Frequency-agile in range 5-42 MHz
• Monitoring transponder for compact/house connection amplifiers and optical com-
pact receivers (see table)
• Monitors various parameters such as voltage, current drain and internal temperature
• Controls the Ingress Control switch in correspondingly equipped devices
• Transmission in DOCSIS or EuroDOCSIS protocol
• Frequency-agile in range 5-65 MHz and 90-862 MHz
The hand-held unit presents the following
functions:
• All appropriately equipped devices or modules can be
adjusted and operated
• All settings are displayed
• The last settings are saved (copy function)
• The hand-held unit is power-supplied by the respective
module
• Distances:
Data transfer between HTE 10 and the device or
module over max. 14 m
Standard connection cable: 2 m (included in delivery
scope)
Can be extended to 14 m (TDK 10) -
-
-
• 4-line display, illuminated
• Language: English
• Splash-proof/shock-proof
• Ambient conditions:
- Ambient temperature: -20 to +50 °C
- Suitable for outdoor application
- Protection category: IP 54
• Control signal: Serial, RS 232
• Connection: Sub D, 9-pin
• Accessories (not included in delivery scope):
TDK 10 (Order no. 26210054): Connection cable 14 m
TDK 12 (Order no. 26210076): PC connection cable for
HTE 10 (for software updates)