Konica Minolta 4556-9598-01A - Manual (Page 32)

Specifying Settings in Configuration Menu 26
Specifying Settings in Configuration Menu
General Procedure for Specifying Settings in
Configuration Menu
1
With the Fax mode screen displayed, press the Menu Select key to enter
the configuration menu.
2
Check the name of the menu in the upper line, and then press the Menu
Select key to specify a setting for an option in the displayed menu.
OR
To select a different menu, press the + or , key to select the desired
menu. Refer to the menu configuration on page 12 to display the desired
menu. After the name of the desired menu is displayed, press the Menu
Select key.
"
The desired menu can also be displayed by pressing the key in the
keypad for the corresponding number.
Example: To display “Buzzer Volume”, press the 6 key in the
MACHINE SETTING screen.
For the number assigned to each menu option, refer to the menu
configuration on page 12.
3
To select a setting, press the * or ) key to move beside the desired
setting.
If ) appears in the list of settings, more settings are available.
OR
If + or , appears in the screen displaying the settings, press the + or ,
key until the desired setting is displayed.
OR
To enter a setting, use the keypad to type in the number.
4
Press the Menu Select key.
The setting is applied, and the Fax mode screen appears again.
"
To cancel the settings, press the Cancel/C key.