Konica Minolta 4556-9598-01A - Manual (Page 52)

Receiving Faxes Automatically 46
Receiving Faxes Automatically
If the RX Mode parameter on the RX Setting menu is set to “Auto RX”, no
special operation is needed in order to receive the fax. Reception begins after
the specified number of rings.
"
If the RX Mode parameter on the RX Setting menu is set “Manual RX”,
the fax is not received automatically. For details, refer to “RX SET-
TING” on page 21.
"
If “Memory RX Mode” is set to “ON”, printing does not begin automati-
cally after the fax is received. A received document is saved in the
memory and is printed at the time specified for “Memory RX Mode”. In
addition, if “Memory RX Mode” is set to “OFF”, the fax is printed. For
details on “Memory RX Mode” in the configuration menu, refer to “RX
SETTING” on page 21. For details on specifying the settings for
“Memory RX Mode”, refer to “Setting Up the Memory RX Mode” on
page 27.
Receiving Faxes Manually
If a telephone is connected to this machine and the same line is used for
phoning and faxing, the fax can be received after picking up the telephone
receiver.
1
After the telephone rings, pick up the receiver.
"
If the telephone receiver is not picked up, reception begins automati-
cally, if the call is being received from a fax machine, after the number
of rings specified by “NO. of RINGS” on the RX SETTING menu. If the
call is being received from a telephone, the ringing will continue.
"
If “RX MODE” on the RX SETTING menu is set to “Manual RX”, the
machine will continue ringing whether the call is being received from a
fax machine or a telephone.
"
If no telephone is connected to this machine, press the On hook key.
2
Press the Start key.
The machine starts receiving the fax.
"
After completing the telephone conversation, press the Start key to
begin receiving the fax.
"
If the telephone receiver is picked up and the call is being received
from a fax machine, press the Start key to begin receiving the fax.