Konica Minolta 4556-9598-01A - Manual (Page 60)

Speed Dialing 54
6
Using the keypad, enter the fax number of the recipient and then press
the Menu Select key.
"
The fax number can contain a maximum of 50 characters.
"
For details on entering/editing numbers, refer to “Entering Text” on
page 73.
"
To cancel programming, press the Cancel/C key. (To cancel program-
ming while the number is being entered, press the Menu Select key,
and then press the Cancel/C key.)
7
Select the modem speed, and then press the Menu/Select key.
The entered information is registered with the speed dial number, and
then the speed dial input screen appears.
8
To program another speed dial number, enter the speed dial number, and
then repeat the procedure starting from step 5.
OR
To finish the procedure and return to the Fax mode screen, continue
pressing the Cancel/C key until the Fax mode screen is displayed.
Changing/Deleting Speed Dial Information
The registered speed dial information can be corrected.
1
Press the Menu Select key, then the , key three times.
2
Check that the FAX REGISTRATION screen appears, then press the
Menu Select key, and then press the , key.
3
Check that the SPEED DIAL screen appears, and then press the Menu
Select key.
4
Using the keypad, enter the speed dial number that you want to change or
delete.
5
Press the Cancel /C key.
6
Using the * and ) keys, select either “EDIT” or “DELETE”, and then
press the Menu Select key.
"
If “EDIT” was selected, the name is displayed. (Continue with step 7.)
"
If “DELETE” was selected, the settings programmed for the speed dial
number are deleted and the speed dial input screen appears again.
"
If a speed dial number used in group dialing is deleted, it is also
deleted from the corresponding group dialing.