User instructions – Karcher KMR 1250 B User Manual

Page 9

Advertising
background image

English

User Instructions

KMR 1250 B

34

Preparing the sweeper for
use

All directions given (left/right, front/rear) are as seen from
the driver’s seat.

n

Check the oil level in the engine (see Chapter: “Mainte-
nance”).

n

Check the amount of fuel in the tank and fill up, if required
(see below).

n

Check the level of hydraulic fluid and top up, if required
(see Chapter: “Maintenance”).

n

Check the air pressure in the tyres (see Chapter:
“Maintenance”).

n

Inspect the brush roller and remove any string, rope, etc.,
that may be caught up in the brushes.

n

Check the dust filter. If it is very dirty, operate the shaker
to clean it off.

n

Empty the waste container.

Adjusting the driver’s seat

The driver’s seat can be adjusted to suit persons of various
heights.

n

Unhook the rods in the seat tilting device.

ç

Undo the 4 screws.

n

Move the seat to the desired position.

n

Tighten the screws and hook the rods back into the tilting
device.

Filling the fuel tank

!

Explosion hazard while refuelling!

n

Do not fill up with fuel
– in an enclosed space
– while the engine is running.

n

Do not smoke while refuelling the vehicle.

n

Fuel expands as it becomes warmer.
Do not fill the tank right up to the top. Leave a gap of at
least 1 cm under the bottom edge of the filler neck.

n

Wipe up any fuel they may have been spilt and ensure
that the cap is replaced firmly on the tank.

n

Use petrol, regular (lead-free).

Opening the fuel tap

n

Open the unit cover.

ç

Open the fuel tap.
OPEN = lever pushed to side opposite to direction of
travel

n

Close the unit cover.

Advertising