Applications, Stamp/overlay (continued) – Konica Minolta 7075 User Manual
Page 193
Applications 9-41
Applications
Stamp/Overlay (continued)
4 When selecting STAMP, SET NUMBERING, PAGE NUMBERING, or DATE/TIME,
select the desired position from 9 location keys on each screen.
If fine adjustment is required, touch
FINE ADJ. OF POSITION
to display the Fine
Adjustment Setting Screen.
Touch
UP SIDE
,
DOWN SIDE
,
RIGHT SIDE
, or
LEFT SIDE
to specify the direction, then
use the touch screen keypad or up/down arrow key to enter the desired amount.
Fine Adjustment Setting Screen
5 Touch
CHARACTER SIZE
, if desired, to change the character size. The following
options are provided:
STAMP
: LARGER/ SMALLER
SET NUMBERING
: 20pt/ 36pt
PAGE NUMBERING
: 8pt/ 10pt/ 12pt/ 14pt
DATE/TIME
: 8pt/ 10pt/ 12pt/ 14pt
6 Touch
PRINTED PAGE
on the Stamp Selection, Set Numbering Type Selection, or
Date/Time Type Selection Screen to designate whether to print the selected stamp on
the cover only or on all pages.
Touch
PRINTED PAGE
on the Page Numbering Type Selection Screen to display the
Cover/Insert Print Setting Selection Screen.
• When selecting the COVER PRINT SETTING, touch Front & Back: Print ON, Front: Print
OFF and Back: Print ON, or Front & Back: Print OFF.
• When selecting the INSERT PRINT SETTING, touch Print ON, Print OFF, or Skip page, as
provided for each of copied insert and blank insert.
Touch OK to return to the Page Numbering Type Selection Screen. You will find that the
screen reflects the selection you made.
Cover/Insert Print Setting Selection Screen
Page Numbering Type Selection Screen
(with INSERT PRINT SETTING selected)