Basic operations, Copy density (continued) – Konica Minolta 7075 User Manual
Page 78
6-8 Basic Operations
Basic Operations
Copy Density (continued)
Density Shift
Density shift divides each of nine density levels into two levels of lighter and three levels
of darker.
Density shift can be used in 4 density modes; Auto (Text/photo), Text, Photo, and
Increase contrast.
1 Touch
SPECIAL ORIGINAL
to display the Special Original Screen.
2 Select the density mode.
To select the Auto (Text/Photo) mode, touch
AUTO
to highlight it, then press [
P
(COUNT
)].
The following message will be displayed.
Density Shift (Text/Photo)
2 (0 ~ 5)
To select the Text mode, touch
Text
to highlight it, then press [
P (COUNT
)].
The following message will be displayed.
Density Shift (Text)
2 (0 ~ 5)
To select the Photo mode, touch
Photo
to highlight it, then press [
P (COUNT
)].
The following message will be displayed.
Density Shift (Photo)
2 (0 ~ 5)
Density shift 3
Density shift 2
Density shift 1
Density shift 0
Density shift 4
Density shift 5