KTI Networks KS-2260 - Manual (Page 133)

-133-
STP parameters settings:
STP State : Enable or disable STP function
Priority : A value used to identify the root bridge. The bridge with the
lowest value has the highest priority and is selected as the root. Valid
values : 1 through 65535.
Max Age : The number of seconds a bridge waits without receiving
Spanning-Tree Protocol configuration messages before attempting a
reconfiguration. Valid values : 6 ~ 40
Hello Time : The number of seconds between the transmission of Span-
ning-Tree Protocol configuration messages. Valid values : 1 ~ 10
Forward Delay time : The number of seconds a port waits before chang-
ing from its Spanning-Tree Protocol learning and listening states to the
forwarding state. Valid values : 4 ~ 30
Refer to Chapter 1 for STP Parameter Descriptions.