KTI Networks KS-2260 - Manual (Page 73)

-73-
Current spanning tree information about the Root Bridge is shown on the
left side and new values for STP parameters are configured on the right
side.
The settings are:
Priority : The priority is assigned to the switch. The higher value is
lower priority. Range: 0 - 65535
Max Age : The number of seconds a bridge waits without receiving
Spanning Tree protocol configuration messages before attempting a
reconfiguration. Valid value : 6 ~ 40.
Hello Time : The number of seconds between the transmission of Span-
ning Tree protocol configuration messages. Valid value : 1 ~ 10.
Forward Delay Time : The number of seconds a port waits before chang-
ing from its Spanning Tree Protocol learning and listening states to the
forwarding state. Valid value : 4 ~ 30.
For descriptions of STP status and parameters, refer to Chapter 1 - Span-
ning Tree Protocol section.