K-Tec HP3A - Manual (Page 14)

HP-11
7.3 BLENDED TEXTURE UNSATISFACTORY
If the blended texture of product is lumpy or uneven, do the following:
• Ensure the mixture is not cavitating during the cycle. Cavitation is a condi-
tion in which the blender blade spins freely in an air pocket within the drink
mix because the mix is too cold or too solid. This problem can be corrected
by increasing the mix temperature by reducing ice, increasing liquid and/or
ensuring that the frozen ingredients used in the recipe are never colder than
10 degrees Fahrenheit (-12 degrees Celsius).
• Increase cycle time. If the drink is mixing well but has not had enough time
for complete blending, try a longer cycle (usually by using higher button
number to start the blender) or touch and hold the “Pulse” button for required
extra blending time.
• TRIED EVERYTHING? If none of the preceding suggestions work, contact
your Blendtec service agent for further assistance.
INSTRUCTIONS THAT APPEAR IN THIS USER
GUIDE ARE NOT MEANT TO COVER EVERY
POSSIBLE CONDITION OR SITUATION THAT
MAY OCCUR. GOOD JUDGMENT MUST BE
USED WHEN OPERATING THIS OR ANY OTHER
MACHINERY.