Important information – K-Tec HP3A User Manual

Page 4

Advertising
background image

HP-1

SECTION 1

IMPORTANT INFORMATION

Read all instructions carefully before using your Blender™

1.1 SAFETY CERTIFICATION

The blender is certified by ETL (Report No. 3018204-4,

3018204-2 & 3018204-3).

1.2 CERTIFICATION

Blender and its accessories are certified by NSF

International (NSF), under K-TEC in the NSF Official

Listing.

1.3 AVOID CONTACT WITH MOVING PARTS

• Keep fingers, hands, hair and clothing away from all moving parts.

• Keep all utensils away from the drive socket and blender blades during

operation. Metal utensils will damage blades.

• NEVER put hands into blender jar or add substances by hand when the

blender is operating.

• NEVER place jar into drive socket if blender motor is operating.

• DO NOT rock the blender during operation.

These precautions will prevent personal injury and/or damage to the blender.

1.4 NEVER OPERATE THE BLENDER IF IT APPEARS DAMAGED

If the blender malfunctions call your service agent first. If it is dropped or dam-

aged in any way, return the blender to a Blendtec service agent immediately for

examination, repair, electrical or mechanical adjustment, or possible replace-

ment.

1.5 NEVER OPERATE BLENDER IN LIQUID

Do not operate the blender motor in water or any other liquid. Avoid all contact

between the motor and water. Do not use the blender outdoors where it is sub-

ject to precipitation.

1.6 NEVER PUT NON-FOOD ITEMS INTO JAR

Metal utensils, rocks and glass are dangerous if placed in jar. Damage caused

by such foreign objects will void the warranty. Keep hands and utensils out of

jar while blending to reduce the risk of severe injury to persons or damage to the

blender. Utensils may only be used when the blender is not running.

1.7 NEVER OPERATE THE BLENDER WITHOUT THE LID IN PLACE

R

Advertising