Kawai CE200 - Manual (Page 39)

39 FUNCTION BUTTONS
Function Buttons
14. LAYER OCTAVE SHIFT
This allows the octave of the layered part to be be shifted up or down
when you use the dual function.
Press the SPLIT button while holding down the TOUCH and the
TRANSPOSE buttons.
The display alternatively shows “LAo” (= Layer Octave) and a number
which represents how many octaves the layered part is shifted up or down.
Use the VALUE buttons to set the desired layer octave shift range.
Layer Octave Shift can be set between -2 to 2.
15. LAYER DYNAMICS
In Dual mode sometimes simply adjusting the volume balance between
the two layered sounds is not enough to create the desired sound character
if both sounds are very dynamic. Two equally dynamic sounds can be
difficult to control and play comfortably. The Layer Dynamics function
allows you to limit the overall dynamic sensitivity of the layered sound to
create a perfect blend between both sounds in a layer. In addition to
reducing the volume of the layered sound, limiting the dynamic sensitivity
of the layered sound also makes the layered sound easier to control in
relation to the main sound as you play. With this function, you can
comfortably play as dynamically as you like with the main sound while
maintaining control of the layered sound.
Press the TEMPO button while holding down the TOUCH and the
TRANSPOSE buttons.
The display alternatively shows “dyn” (= Dynamics) and a number which
represents the level of dynamics.
Use the VALUE buttons to set the desired layer dynamics range.
You can select the level of dynamics from 1 to 10. A value of 1 produces
the greatest reduction in dynamics and a value of 10 produces no change
in the dynamics. The default value is 10.