Kawai CE200 - Manual (Page 51)

51 JACKS
Jacks
computer, and make sure to install the driver. If you connect the unit to
the computer without installing the driver, the USB-MIDI driver may not
operate properly. If this occurs, use the driver update function of the OS
to install the appropriate USB-MIDI driver, or delete the driver by using
the driver delete function and then install the driver again.
To establish MIDI communications with the unit by using an application,
select "KAWAI USB MIDI IN" and "KAWAI USB MIDI OUT" to define the
unit as a MIDI device.
Macintosh OS X users:
When the unit is used with Macintosh OS X, the unit will be recognized as
a MIDI device automatically; therefore, no special driver is needed.
To establish MIDI communications with the unit by using an application,
select "USB-MIDI" to define the unit as a MIDI device.
Users of Macintosh OS9 or earlier:
The unit does not support Macintosh OS9 or earlier. Please establish a
MIDI connection by using a commercially available MIDI interface.
NOTES ON USB
When MIDI and USB are connected simultaneously, USB will be
prioritized.
When connecting a digital piano to a computer by using a USB cable, first
connect the cable and then turn on the power of the digital piano.
When a digital piano is connected to a computer by using a USB cable, it
may take some time before communications start.
When a digital piano and a computer are connected via a hub, and the
operation is not stable, connect the digital piano directly to the USB port
of the computer.
Operations of a computer or a digital piano may become unstable if the
power of the piano is turned on or off, or if the USB cable is pulled out or
inserted during:
: Driver installation
: Computer power-up
: MIDI application operations
: Communication with the computer
: Standby in power-saving mode
*USB may not operate properly depending on the settings of your
computer. Read the computer instruction manual thoroughly before use
and ensure that appropriate settings are made.