Kawai CE200 - Manual (Page 50)

50 KAWAI DIGITAL PIANO CE200
Jacks
7. J
ACKS
MIDI J
ACKS
These jacks are used to connect external MIDI devices with the CE200
piano.
There are two terminals: MIDI IN and MIDI OUT.
USB J
ACK
This jack is used to connect with a personal computer and exchange MIDI
data.
When the CE200 piano is connected to a computer via a commercially
available USB cable, the CE200 piano will be recognized as a MIDI device.
As with a regular MIDI interface, the CE200 piano will be able to transmit
and receive MIDI messages.
There are A USB port and B USB port. Connect a computer to the A port
and digital piano to the B port.
ABOUT A USB DRIVER
For data exchange between a computer and digital piano via USB
connection, software (USB-MIDI driver) must be installed on the computer
for proper digital piano operations.
Please read the following instructions carefully as a different USB-MIDI
driver may be necessary depending on the computer OS.
Windows XP / Me users:
The standard USB-MIDI driver installed on Windows will be used. This
USB-MIDI driver will be automatically installed when the unit is connected
to the computer.
To establish MIDI communications with the unit by using an application,
select "USB audio device" to define the unit as a MIDI device.
Windows 2000 / 98SE users:
You need to install the specifi ed, special USB-MIDI driver. Download the
special USB driver from the KAWAI site as shown below, and install it on
the computer.
http://www.kawai.co.jp/download_demo/driver/
Read the instruction manual thoroughly before connecting the unit to the