Options - style 1, Timer, Options selection pad – KITCHENAID KERI203 User Manual

Page 12: Fahrenheit and celsius, Tones, Oven temperature calibration

Advertising
background image

12

Timer

The Timer counts down the set time. On models with electronic
oven control Style 1, the timer can be set in minutes and seconds
or hours and minutes.

NOTE: The Timer does not start or stop the oven.

1. Press TIMER SET/START.

On models with electronic oven control Style 1, press again
to switch from MIN/SEC and HR/MIN.

2. Press the number pads to set length of time.

3. Press TIMER SET/START to start the timer.

When the set time ends, timer completion tones will sound,
then reminder tones will sound every 10 seconds.

4. Press TIMER OFF anytime to cancel the Timer and/or stop

reminder tones.

Remember, if OFF is pressed, the oven will turn off.

5. The time can be reset during the countdown by repeating the

above steps.

OPTIONS - STYLE 1

Options Selection Pad

The OPTIONS selection pad allows you to access special
functions within the Electronic Oven Control that allow you to
customize the product to your needs. These special functions
allow you to change the oven temperature between Fahrenheit
and Celsius, turn the audible signals and prompts on and off, and
adjust the oven calibration. The Sabbath Mode is also set using
the OPTIONS selection pad.

To Use: Press OPTIONS. The oven display will scroll through the
various options, starting at 1 and ending in 7. You can also press
the OPTIONS selection pad and number pad to quickly access
the desired hidden function.

Fahrenheit and Celsius

Press options, then 1 on the keypad for Celsius. Repeat to
convert back to Fahrenheit.

Tones

Tones are audible signals, indicating the following:

One beep

Function has been entered

Three beeps

Invalid pad press

Timer Completion Tones

Four chimes occur when the timer reaches zero. This can occur
when using the timer for functions other than cooking.

Cooking Time Completion Tones

Three beeps indicate the end of a cooking cycle.

To turn On/Off: Press OPTIONS, and then 4 to turn OFF. Press
OPTIONS, and then 4 to turn ON.

Preheat Completion Tone

One chime indicates a preheat cycle has been completed.

All Tones

All tones are preset ON, but can be turned OFF. To turn tones ON,
press the options key, then press keypad 2. To turn tones OFF,
press the options key again, and then press keypad 2.

Tone Volume

The volume is preset at high, but can be changed to low.

To Change: Press OPTIONS, and then 3 to lower the volume.
Press OPTIONS, and then 3 to raise the volume of the tones.

Oven Temperature Calibration

IMPORTANT: Do not use a thermometer to measure oven
temperature because opening the oven door during cycling may
give incorrect readings.

The oven provides accurate temperatures; however, it may cook
faster or slower than your previous oven, so the temperature
calibration can be adjusted. It can be changed in Fahrenheit or
Celsius.

A minus sign means the oven will be cooler by the displayed
amount. The absence of a sign means the oven will be warmer by
the displayed amount. Use the following chart as a guide.

To Adjust Oven Temperature Calibration:

1. Press OPTIONS, and then 6 to set the calibration.

2. Press 3 to increase the temperature, or press 6 to decrease

the temperature.

3. Press START to end calibration.

OPTIONS

SPECIAL FUNCTION

1

Fahrenheit and Celsius conversion

2

Tones On and Off

3

Tones High and Low

4

Cooking Time Completion Tones On and
Off

6

Oven Temperature Calibration

7

Sabbath Mode

ADJUSTMENT °F
(AUTOMATIC °C CHANGE)

COOKS FOOD

10°F (5°C)

...a little more

20°F (10°C)

...moderately more

35°F (15°C)

...much more

-10°F (-5°C)

...a little less

-20°F (-10°C)

...moderately less

-35°F (-15°C)

...much less

Advertising