Warning, Simmer feature, Warm zone element – KITCHENAID KERI203 User Manual

Page 9: Power on lights, Hot surface indicator lights, Under ceramic glass)

Advertising
background image

9

To Use SINGLE:

1. Push in and turn knob clockwise from the OFF position to the

SINGLE zone anywhere between LO and HI.

2. Turn knob to OFF when finished.

To Use DUAL:

1. Push in and turn knob counterclockwise from the OFF

position to the DUAL zone anywhere between LO and HI.

2. Turn knob to OFF when finished.

Simmer Feature

The Simmer feature is an adjustable heat setting for more precise
simmering. It is the right front (and left rear on some models)
surface cooking areas or elements. When the Simmer feature is
not on, the right front surface cooking areas or elements will
function as usual.

When this feature is on, the wattage to the burner is significantly
reduced. It provides a wide range of temperatures for simmering.
Choose from the higher levels for stocks and water-based foods
or the lower levels for sauces, puddings and gravies.

To Use:

1. Set SIMMER switch to ON (press left).

2. Select desired temperate setting from LO to HI.

3. Set SIMMER switch to OFF (press right) when finished for

element to work normally.

Warm Zone Element

Use the Warm Zone Element to keep cooked foods warm. One
hour is the recommended maximum time to maintain food
quality.

Do not use it to heat cold foods.

The Warm Zone Element can be used alone or when any of the
other surface cooking areas are being used. The Warm Zone
Element area will not glow red when cycling on. However, its
indicator light will glow as long as the Warm Zone Element area is
too hot to touch.

Use only cookware and dishes recommended for oven and
cooktop use.

Cover all foods with a lid or aluminum foil. When warming
baked goods, allow a small opening in the cover for moisture
to escape.

Do not use plastic wrap to cover food. Plastic wrap may melt.

Use pot holders or oven mitts to remove food.

To Use:

1. Set switch to ON (press left). The switch lights up when the

Warm Zone Element is on.

2. Set switch to OFF (press right) when finished.

POWER ON Lights

Each pair of control knobs has a POWER ON light. The light will
glow when its control knob is on.

Hot Surface Indicator Lights

(under ceramic glass)

The hot surface indicator lights will glow as long as any surface
cooking area is too hot to touch, even after the surface cooking
area(s) is turned off.

D

U

A

L

S

IN

G

LE

Lo

Lo

Hi

Hi

OFF

Simmer

On/Off

WARNING

Food Poisoning Hazard

Do not let food sit for more than one hour before or
after cooking.

Doing so can result in food poisoning or sickness.

A. Power on indicator light

Warm Zone

On/Off

Lo

Hi

OFF

Med

Lo

Med
Hi

Med

A

HOT SURFACE

Advertising