KVH Industries TracVision G4 - Manual (Page 38)

Connecting the GyroTrac Sensor Cable
1. Connect the connectorized end of the sensor cable
to the GyroTrac sensor module. Twist until locked
in place.
2. Connect the other end of the sensor cable to the
blue ADCU terminal strip connector as shown in
Figure 2-25.
Installation
54-0147 33
13 14 23 22 21 20 19 18 24 17 16 15
White/Green
White/Blue
Blue/White
White/Orange
Orange/White
Green/White
Blue Label
Sensor Cable
Connector
Figure 2-24
GyroTrac Sensor Connector
Figure 2-25
Sensor Cable to ADCU Wiring