Kambrook KFP90 - Manual (Page 9)

9
When processing is complete, turn to the
Off (0) position.Wait until blades have
stopped rotating before removing the lid,
blades or processor bowl.
ASSEMBLY AND
OPERARTION OF THE
BLENDER
Your Food Processor Deluxe blender
features 2 safety locking devices.
NOTE: the blender will not operate unless:
1.The blender jug is correctly positioned
and LOCKED onto the motor base
2.The processor bowl AND lid are
correctly locked into place (refer to
previous instructions)
NOTE:The food processor will not operate while
the blender jug is assembled to base. If processing
is required, remove the blender and fit the Blender
Drive Cover.
Correct placement of the
blender jug
Unlock and remove the blender drive cover.
Align the arrow on the lower edge of
the blender jug with the align handle
arrow
on the motor cover.Turn the
blender jug clockwise until the arrow on
the blender is aligned with the lock handle
arrow
on the motor cover, a “click”
sound will be heard.
Ensure the speed dial is in the Off (0)
position.
Plug into a 230/240 volt power outlet.
Turn power on.
The blender is now ready to use.
Place ingredients into the jug. Note do not
overfill the jug (ie/ above the MAX mark).
Firmly fit the lid to the top of the blender.
Ensuring that the ‘filler cap’ (inside the lid)
is correctly locked into position.
With your hand on top of the blender lid
initially, turn the ‘Power Control Dial’ from
the Off (0) position to either the Low (1),
Medium (2) or High (3) speed, depending
your requirements.The speed can be
changed at any time during blending.
✔