KVH Industries LF User Manual
Owner’s manual, Kvh tracv ision, Lf /sf
Advertising
Table of contents
Document Outline
- Addenda
- Welcome Page
- Table of Contents
- 1 - Introduction
- 2 - Installation
- 2.1 - Choosing the Best Location
- 2.2 - Mounting the Antenna Unit
- 2.3 - Connecting System Components
- 2.3.1 - Connecting the Antenna to the Switchplate
- 2.3.2 - Connecting the Antenna to the IRD
- 2.3.3 - Sealing the Cable Access Hole
- 2.3.4 - Connecting the Switchplate to the IRD (Optional)
- 2.3.5 - Connecting the Switchplate to Vehicle Power
- 2.3.6 - Connecting the IRD Ground Wire
- 2.3.7 - Installing the Switchplate
- 2.4 - Activating the IRD
- 2.5 - Checking Out the System
- 2.6 - Configuring TracVision LF/SF for Remote Satellite Dish Operation
- 3 - Using Your TracVision LF/SF
- 4 - Troubleshooting
- 4.1 - Causes and Remedies for Common Operational Issues
- 4.1.1 - Blown Fuse or Improper Wiring
- 4.1.2 - Dew or Rain Pooling on Dome
- 4.1.3 - Satellite Signal Blocked
- 4.1.4 - Satellite Coverage Issue
- 4.1.5 - Vehicle Turning During Startup (TracVision LF only)
- 4.1.6 - Incorrect or Loose RF Connectors
- 4.1.7 - Type of Multiswitch Used
- 4.1.8 - Stationary Use Only (TracVision SF only)
- 4.2 - IRD Troubleshooting
- 4.3 - Antenna Gyro and LNB Faults
- 4.4 - Computer Diagnostics
- 4.5 - Maintenance Port Parser Commands
- 4.1 - Causes and Remedies for Common Operational Issues
- 5 - Maintenance
- Appendix A - System Specifications
- Appendix B - Comprehensive System Wiring Diagram
- Appendix C - Switchplate Template
- Appendix D - EchoStar IRD Activation Procedure
- Appendix E - Startup Data Sequences
- Appendix F - Maintenance Port Parser Commands
- Warranty Page