Kenwood R-K701 - Manual (Page 18)

18 EN
ENGLISH
Basic use method
Changing measured Room Equalizer Char-
acteristics according to situation (ROOM
EQ MODE)
1 Select "ROOM EQ MODE" by pressing the
SOUND SELECTOR key. Or, press the
ROOM EQ MODE key on the remote control
unit.
SOUND SELECTOR
or
2 Select a mode by using the SOUND
CONTROL knob on the main unit or SOUND
CONTROL
% / fi key on the remote control
unit.
The following mode items can be selected:
"NORMAL": This mode reproduces the
sound optimized based on the
measured results by ROOM
EQ. Usually, use this mode.
"WIDE": Mode that you can enjoy
music at a relatively wide area
centering around the mea-
sured position. It is conve-
nient, for example, when you
wish to listen to music walk-
ing around room at a home
party.
"NIGHT": Mode that is convenient when
you wish to enjoy music with
low volume at midnight. It is
adjusted based on melodious
sounds such as vocal and will
relatively be clear sound with
low volume.
÷ The ROOM EQ MODE indicator blinks, and when it
is selected, the indicator lights up.
÷ If no operation continues for 20 seconds, it returns
to the original display.
To cancel the measurement
Turn the VOLUME knob on the main unit or
press the VOLUME
% / fi key on the remote
control unit.
VOLUME
or
÷ Another method of cancellation: Press the ROOM
EQ key on the remote control unit. When "R.EQ
CANCEL?" is displayed, press the ENTER key.
04.12.15, 23:47 18