KORG TouchView Trinity ProX - Manual (Page 142)

16: Dual Long Delay
138
16: Dual Long Delay
This 2-channel delay allows you to set the delay time for left and right channels independently. You can
set a maximum of 1,360msec for the delay time.
a L Delay Time [msec] 0.0…1360.0msec Sets the delay time for the left channel.
b L Feedback –100…+100 Sets the feedback amount for the left channel.
c
L High Damp [%] 0…100%
Damping amount in the high range for the left channel
☞ P.44
L Low Damp [%] 0…100% Damping amount in the low range for the left channel
d R Delay Time [msec] 0.0…1360.0msec Sets the delay time for the right channel.
e R Feedback –100…+100 Sets the feedback amount for the right channel.
f
R High Damp [%] 0…100%
Damping amount in the high range for the right channel
☞ P.44
R Low Damp [%] 0…100% Damping amount in the low range for the right channel
g
Input Level D-mod: Src None…Tempo Modulation source of the left and right input level ☞ P.44
Amt L –100…+100 Modulation amount of the input level for the left channel
h Amt R –100…+100
Modulation amount of the input level for the right channel
☞ P.44
i
L Wet/Dry Dry, 1:99…99:1, Wet
Sets the balance between the effect and dry sounds for
the left channel.
Src None…Tempo Modulation source of left/right effect balance
Amt –100…+100 Modulation amount of effect balance for the left channel
j
R Wet/Dry Dry, 1:99…99:1, Wet
Sets the balance between the effect and dry sounds for
the right channel.
Amt –100…+100 Modulation amount of effect balance for the right channel
Delay
Delay
Left
Right
Feedback
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
Input Level D-mod
Input Level D-mod
High Damp Low Damp
High Damp Low Damp