KORG TouchView Trinity ProX - Manual (Page 42)

21: Vibrato
38
21: Vibrato
This effect causes the pitch of the input signal to shimmer. Using the AutoFade allows you to increase or
decrease the shimmering speed.
a
AUTOFADE Src None…Tempo
Sets the modulation source that starts AutoFade.
☞
P.78
Fade-In Rate 1…100 Sets the rate of fade-in.
b LFO Waveform Triangle, Sine Selects the LFO Waveform.
c LFO Shape –100…+100
Determines how much the LFO waveform shape is
changed.
☞
P.32
d
LFO Frequency [Hz] 0.02…20.00Hz LFO speed
Src None…AUTOFADE Modulation source of LFO speed. AutoFade is available.
Amt –20.00…+20.00Hz Modulation amount of LFO speed
e
Depth 0…100 Depth of LFO modulation
Src None…Tempo Modulation source of the LFO modulation depth
Amt –100…+100 Modulation depth of the LFO modulation depth
f
Wet/Dry Dry, 1:99…99:1, Wet Sets the balance between the effect and dry sounds.
Src None…Tempo Modulation source of effect balance
Amt –100…+100 Modulation amount of effect balance
Vibrato
In
Wet / Dry
Mono In - Mono Out
LFO: Tri / Sine LFO Shape
LFO Frequency AutoFade