Rotary speaker, Size1 – KORG TouchView Trinity ProX User Manual

Page 47

Advertising
background image

25: Rotary Speaker

43

size1

25: Rotary Speaker

This effect simulates a rotary speaker which is essential to organ sounds. This size 1 Rotary Speaker effect
is monaural. You can change the speed of speaker rotation via dynamic modulation. The effect also simu-
lates the microphone settings.

a

Speed Switch

Slow, Fast

Switches the speaker rotation speed between slow and
fast.

Src

None…Tempo

Modulation source that toggles between slow and fast

Sw

Momentary, Toggle

Selects switching mode of the modulation source that tog-
gles between slow and fast.

P.43

b

Horn Acceleration

0…100

How quickly the horn rotation speed in the high range is
switched

P.43

c

Horn Ratio

Stop, 0.5…2.0

Adjusts the (high-range side) horn rotation speed. Stan-
dard value is 1.0. Selecting “Stop” will stop the rotation.

d

Mic Distance

0…100

Distance between the microphone and rotary speaker.

P.43

e

Rotor/Horn Balance

Rotor, 1…99, Horn

Sets the volume level balance between the low-range
rotor and high-range horn.

f

Wet/Dry

Dry, 1:99…99:1, Wet

Sets the balance between the effect and dry sounds.

Src

None…Tempo

Modulation source of effect balance

Amt

–100…+100

Modulation amount of effect balance

a: Sw

This parameter sets how the rotation speed (slow and fast) is switched via the
modulation source.

When Sw = Momentary, the speed is usually slow. It becomes fast only when
you keep the pedal depressed or hold the joystick in position.

When a value for the modulation source is less than 64, “slow” speed is
selected, and when the value is 64 or higher, “fast” is selected.

When Sw = Toggle, the speed is switched between slow and fast each time you
press the pedal or operate the joystick.

Each time the value of the modulation source exceeds 64, the speed is
switched between slow and fast.

b: Horn Acceleration

On a real rotary speaker, the rotation speed is accelerated or decelerated gradu-
ally after you switch the speed. The Horn Acceleration parameter sets the speed
at which the rotation is accelerated or decelerated.

d: Mic Distance

This simulates microphone settings, specifying the distance between the micro-
phone and rotary speaker.

In

Wet / Dry

Mono In - Mono Out

D

-mod

Speed Switch: Slow/Fast

Rotor/Horn

Balance

Mic Distance

Horn

Rotary Speaker

Rotor

Advertising
This manual is related to the following products: