Kuhn Rikon 3100 - Manual (Page 24)

24
3100ST 006046 010507
© Copyright 2004 Kuhn Knight, Inc. Back to Table of Contents
OPTIONS
All Options are available as original equipment or field installation.
DOOR FLOW CONTROL PLATES
Longer feedstuffs will unload smoother and more evenly through a “tall and narrow” opening versus a “short and
wide” opening. Flow control plates have been developed, which allow the operator to use a smaller or existing
conveyor to carry feed from the mixer while keeping the discharge flow of feed (especially long stem hay/haylage
mix) even and smooth. See “Door Parts” section of the corresponding Parts Manual for flow control plate part
numbers.
NOTE: Feed separation may occur if the door is not opened far enough.
ELECTRIC DOOR CONTROL
This option allows the discharge door to be operated from a location away from the mixer, or when an installation
location requires remote door operation.
ELECTRONIC SCALES
Allows accurate ration weight while loading, also scale indicator can be located away from mixer if a more conve-
nient location is preferred. Refer to the manufacturer’s operator’s manual for your specific scale option operation
and maintenance.
HAY MAXX SYSTEM
A bolt-in option designed for the user who wants to more effectively add long stem hay to the ration.
The Hay Maxx System handles small and large square bales, broken-up round bales, frozen bunker silage and
other bulky materials, without over-processing.
ROUGHAGE MAXX SYSTEM
A system of additional lower auger scallop knives that enhance hay processing performance of the reel mixer, with
or without the optional Hay Maxx System. It is designed to allow the lower auger to do more cutting of long stem
hay and roughages, even after hay has been introduced to the ration through the Hay Maxx System.