Kuhn Rikon 3100 - Manual (Page 6)

6
3100ST 006046 010507
© Copyright 2004 Kuhn Knight, Inc. Back to Table of Contents
SAFETY DECALS
Safety decals are placed on this unit for the protection of the operator or any person working on or
standing nearby the unit.
Everyone who operates or maintains the mixer must first read this manual and understand the meaning
of all safety decals. Contact your dealer if foreign language decals are required.
Keep safety decals clean and legible. If any are missing or illegible, contact your Kuhn Knight dealer or
Kuhn Knight to obtain replacements. The part numbers for the decals are located in the lower right corner of the
decal, and listed in this manual on the following pages. Replacement decals may be ordered through your dealer or
the address below.
Kuhn Knight, Inc.
1501 West 7th Ave., Brodhead, WI 53520
701 Cherry Ave., Greeley, CO 80632
Complete sets of decals (including information decals) can be ordered by using the following part numbers:
UNIT PART NO.
3115 70175433 S/N A0028 and before
3115 70175871 S/N A0029 and after
3120 70175436
3125 70175439
3130 70175442
3136 70175445
3142 70175448
3150 70175451
3160 70175454
3170 70175457
3195 70175460
When replacing decals, be sure the surface area is clean and dry, peel the backing off the decal, and apply to
the mixer. Be sure to wipe with a clean cloth to rub out all air bubbles to assure a good seal. For best adhesion
decals should be applied in temperatures of 50°F / 10°C or warmer.
SAFETY