Inserting and removing diskettes – Kreisen 3 8 6 X / X E User Manual

Page 65

Advertising
background image

Never turn off the computer when the hard disk drive light

is on. This light indicates that the computer is copying

data to or from the hard disk. If you interrupt this process,.

you can lose data.

Never attempt to open the hard disk drive. The disk itself

is enclosed in a sealed container to protect it from dust.

Inserting and Removing Diskettes

To insert a diskette into the drive, hold it with the label facing

up and the read/write slot leading into the drive, as shown

below.

Figure 3-4. Inserting a Diskette (5¼”)

Slide the diskette into the slot until it is all the way in. Then
turn the drive latch down to lock it in a vertical position. This

keeps the diskette in place and enables the read/write heads in
the diskette drive to access the diskette.

3-12

Using Your Computer

Advertising