Copying on dual drive system, Copying on dual drive systems – Kreisen 3 8 6 X / X E User Manual

Page 88

Advertising
background image

Type N to return to the system prompt.

If there is a problem with the backup diskette, or if you put the

wrong diskette into the drive by mistake, the computer will
respond:

If the computer shows compare errors, start the copying

procedure over again at the beginning. The backup copy of the

MS-DOS diskette must be identical to the original. After you

have confirmed that the backup diskette is a good copy of the
master MS-DOS diskette, you may put your master diskette

away in a safe place. From now on, only use the master MS-DOS

diskette to make copies. For all other purposes, use the backup

copy of the MS-DOS diskette. By using the backup copy, you
ensure that any accidental erasures can be replaced.

Copying on Dual Drive Systems

To make backup copies of your MS-DOS diskettes on a dualdrive
system, follow the instructions below:

First, turn your computer on and boot up MS-DOS. Choose

the Command Prompt option from the DOS shell menu. The

system prompt will appear. Enter the following command:

4-16

Using MS-DOS With Your Computer

Advertising