Konica Minolta PagePro 1390 MF - Manual (Page 63)

D-21
2-4. Disassembly of the Image Reading Section
(1) Removing the IR Upper Cover (Original Glass)
1. Remove the Document Cover.
2. Remove the Control Panel Assy.
☞ D-12
(2) Removing the Scanner Unit.
1. Remove the IR Upper Cover (Original Glass).
☞ D-21
3. Remove the three screws.
4. Remove the Control Panel bottom housing.
4558F2C025DA
5. Remove the three screws.
6. Remove the IR Upper Cover (Original Glass).
4558F2C026DA
2. Disconnect two Flat Cables from the Scanner
Unit.
NOTE
• Use the utmost care not to snap off the flat cable.
4558F2C017DB
3. Remove the Sliding Rod.
4558F2C027DB