Samsung DS5021D - Manual (Page 28)

Page 14 © SAMSUNG Electronics Co., Ltd.
PREPARATION
Adding an AOM
1.
Connect the DLI cable on the main system to the DLI port at the bottom of AOM. At this
time, the AOM extension pair shall be assigned at the telephone system in order to use
AOM.
2.
Prepare the following AOM connectors and 4 screws that are provided with AOM itself.
3.
Connect AOM to the phone by using the AOM connector. Place the AOM connector
over two screw holes in the right side of AOM and the other two screw holes at the
side of DS-5021D/5014D line cord port. Then tighten those screws.
DLI port
A AOM