Kompernass KH 6504 - Manual (Page 29)

- 27 -
In the case of VCDs/S-VCDs:
•
the current title number/the total number of
titles
• the played back so far time of the current play-
back title on the VCD/S-VCD in hours, minutes
and seconds (SINGLE ELAPSED)
• the time to the end of the current playback
title in hours, seconds and minutes (SINGLE
REMAIN)
For audio CDs:
•
the current title number/the total number of
titles
• the total elapsed time
• the played back so far time of the current play-
back track on the CD in minutes and seconds
(SINGLE ELAPSED)
• the time to the end of the current playback
track in minutes and seconds (SINGLE
REMAIN)
• the total played back time of the CD in minutes
and seconds (TOTAL ELAPSED)
• the time to the end of the CD in minutes and
seconds (TOTAL REMAIN)
• To fade out the disc information press the
"
DISPLAY " button again.
10.4 Programming function
You can programme a playback sequence for the
titles and chapters that are available on the DVD,
VCD, S-VCD disc.
For this, during playback, press the
PROG button to
superimpose the following window:
Programming window
The upper line shows the total number of titles ( TT: )
available on the disc.
Under this the programme positions 1-10 are listed,
programme position 1 is highlighted.
1. With the number buttons enter the number of
the title that is to be played back first.
The upper line will now show the chapters available
in this title (CH:).
2. With the number buttons enter the number of
the chapter that is to be played back. The high-
lighting moves to the programme position 2.
3. Select with the control buttons further
programme positions and enter title and chapter
numbers for the programme position.
• To display the next 10 programme slots select,
with the control buttons
, the field
and press the OK / ENTER button. You can allocate
up to 20 programme positions.
• To delete entries in a programme position
select the programme position and press the
CLEAR button.
• To cancel the programme function select the
EXIT field and press the
OK / ENTER button. All
allocated programme positions are deleted.
4. You can start playback of the programme posi-
tions by selecting the START field and pressing
the
OK / ENTER button.
IB_KH6504_V865_LB6_V2 24.01.2008 18:26 Uhr Seite 27