Kaito electronic KA800 - Manual (Page 13)

10
RADIO OPERATION
LISTENING TO THE RADIO
Radio Mode Selection
Push the <Working Mode Switch> to "Radio" to select the
radio mode. You can tune and save stations in this working
mode.
Band Selection
After turning on the radio, select "Radio" working mode.
Press <FM> button shortly to select the FM band;
Press <MW> button shortly to select the MW(AM) band;
Press <WB> button shortly to select the Weather band.
Adjust the Volume
Press <V+> or <V-> button to adjust the volume. 1- 31
Using the Antenna
1. While listening to the FM and WB station, please adjust the
length of the telescopic antenna to get the best reception.
2. The MW (AM) ferrite-bar antenna is located inside the
radio. It is strongly affected by the direction you put it in.
While listening to the MW(AM) station, rotate the radio to
find the position which gives the best reception.