Kaito electronic KA800 - Manual (Page 27)

24
RECORD FILES
ONE TOUCH RECORD FUNCTION
1. Shut off the alarm function before recording, or else the
unit will stop recording and turn on suddenly when it
reaches the alarm time.
2. Please check to make sure there is enough battery power.
3. Push the <Working Mode Switch> to "Voice" and press
< > shortly to turn on the unit.
4. Press & Hold the <REC> button until
" ● " displays. After several seconds,
the record file number displays and
then the record time displays.
5. While recording, press <WB> button
quickly to pause.
6. While recording, press <MW> button quickly to stop and
the record file will be saved as WAV format automatically.
(While finishing the recording, please remember the record
time in order to find the file easily.)
NOTE:
1. You can find and play all the record files in voice mode.
2. If the record time is over 99 hours, "E" will display before recording.
3. The record file numbers will be in order. If you have deleted some
record files, the new record file numbers will be the deleted file
numbers in that same order sequence.
AUTO RECORD FUNCTION
The auto record time setting function is the same as the auto
turn on time setting function. After setting the auto record
time, push the <Working Mode Switch> to "Voice". When you
reach the auto record time, the unit starts to record. If you set
the sleep timer, the unit will stop recording and turn off when
it reaches the end of the sleep timer set time; if you don't set
the sleep timer, the unit will record for 90 minutes and then
turn off automatically.