Ad vance d – Kodak DCS 700 User Manual
Page 194
Advertising
11-21
11
Ad
vance
d
☛
If you are using Single Servo AF mode and recomposing the picture could change
subject-to-camera distance, refocus by briefly removing your finger from the Shutter
Release button then lightly pressing again.
☛
Continuous Servo AF is not recommended if the subject becomes off-center after
recomposing.
3
Adjust the shutter speed and
aperture by rotating the Main-
and/or Sub-Command dials until
the electronic analog exposure
display shows the desired
exposure.
4
Recompose the picture and
capture the image.
AF-ON
AF-L
AE-L
MODE
Advertising