Kodak DCS 700 - Manual (Page 227)

14-6
Visually inspecting the Imager
1 Turn the camera off.
2 Remove the lens from the camera.
3 Remove the IR filter or anti-aliasing filter (page 14-3).
4 Insert a battery, if one is not present.
5 Connect the camera to an AC adapter, if one is not already connected.
6 Turn the camera on.
7 Highlight the Menu icon and choose Main Menu from the dropdown menu.
8 Choose Imager Clean from the Main menu.
CAUTION:
Be very careful when removing the filter, as it is a fragile device.
CAUTION:
Two sources of power are needed as a safeguard to prevent the shutter closing
unexpectedly and being ruined.
If there is no battery in the
camera or the camera is not
connected to the AC adapter, a
screen informs you. Insert a
battery or connect the AC
adapter. Select Retry.