Kyocera Strobe K612b - Manual (Page 23)

User Guide for the Strobe Phone 15
1. From the home screen, press and hold to
dial into your voicemail.
2. Follow the system prompts to record a
greeting and complete the system setup.
Note: If you are having trouble accessing your
voicemail, contact your service provider.
Checking voicemail messages
When a voice message is received, your screen
displays “New Messages” along with the
symbol at the top of your screen.
If you see “New Messages”
1. Press the right softkey to select
Call , which initiates a call to your
voicemail number.
2. Follow the prompts to retrieve the message.
To clear the screen without checking messages:
• Press the left softkey to select Ignore .
If you see only the symbol
1. Press and hold to initiate a call to your
voicemail number.
2. Follow the prompts to retrieve the message.
• You can set the phone to beep or vibrate every
five minutes to remind you that you have
voicemail. See “Setting sound alerts” on
page 46.
Emergency services
Note: Regardless of your 3-digit emergency code
(911, 111, 999, 000, etc.), your phone operates
as described below.
• Dial your 3-digit emergency code and
press .
You can call the code even if your phone is locked
or your account is restricted. When you call, your
phone enters
Emergency mode . This enables the
emergency service exclusive access to your phone
to call you back, if necessary. To make or receive
regular calls after dialing the code, you must exit
this mode.
Exiting Emergency mode
When you have completed the emergency call:
1. Press to select Exit .
2. Press again to confirm your choice.
Note: To determine who has access to your
location, see “Setting position location” on
page 52.
Tracking calls
You can track the number and duration of calls
made and received on your phone.
1. Select Menu
→
Recent Calls .
2. Select a timer:
–
All Calls Timer tracks all calls you have
made and received. This timer cannot
be reset.
82-N8758-1EN.book Page 15 Wednesday, May 10, 2006 2:01 PM