Kyocera Strobe K612b - Manual (Page 71)

User Guide for the Strobe Phone 63
13 U
SING
B
LUETOOTH
® W
IRELESS
T
ECHNOLOGY
The Bluetooth wireless technology on your Strobe
phone enables wireless connectivity with
accessories such as portable or installed hands-
free car kits, headsets, handsets, computers, PC
cards and adapters, PDAs, and speakers.
Note: You must use a Bluetooth wireless
technology device (compatible with Class 2
Bluetooth wireless technology, version 1.2) in
order to use this phone wirelessly. Bluetooth
wireless technology accessories have the
symbol. For additional information on
carrier-supported profiles and third-party
Bluetooth accessory compatibility, visit
www.kyocera-wireless.com/support .
Pairing
You must first “pair” your phone with the
Bluetooth wireless technology enabled device to
allow your phone to communicate with it. Refer to
the instructions for setting up Bluetooth wireless
technology (below) in conjunction with the user
guide provided with your Bluetooth wireless
technology device.
Setting up Bluetooth
wireless technology on your
Kyocera phone
When you turn Bluetooth On the first time, you
will be prompted to do a device search. Follow
the same procedure as for
Find New ,
described below.
1. Select Menu
→
Bluetooth
→
ON/OFF
.
2. Select one of the following:
–
On Invisible hides your phone for all
devices except those listed in My Devices
(recommended setting).
– On Visible allows other devices to find
your phone.
Note: Setting Bluetooth to Off prohibits your
phone from being used with any Bluetooth
wireless technology device. To prolong battery
life, it is recommended to set
Bluetooth to Off
when you are not using it.
3. Prepare the Bluetooth wireless technology
device (Bluetooth accessory) for pairing as
described in the other device’s user guide.
4. Select Menu
→
Bluetooth
→
My Devices .
5. Select Find New .
6. Your phone will search and detect visible
Bluetooth wireless technology enabled devices
in the vicinity.
82-N8758-1EN.book Page 63 Wednesday, May 10, 2006 2:01 PM