Making a call using digit dialing, Using voice features with hands-free car kits, Erasing voice tags – Kyocera Strobe K612b User Manual

Page 67: Waking up the phone

Advertising
background image

User Guide for the Strobe Phone

59

Erasing voice tags

To erase all voice name dial recordings in
your phone:

1. Menu

Settings

Voice Features

Erase Voice Dial

.

2.

Select

Yes

.

Making a call using digit dialing

When using digit dialing, you speak digits to dial a
phone number.

Note:

You cannot

speak a string of digits. You

must speak one digit at a time and wait for
the prompt.

1.

From the home screen, press

. The

phone responds: “Say a name or say Dial.”

2.

Say “

Dial

”. The phone responds: “Speak

a digit.”

3.

Speak the first digit of the phone number you
want to call. Once the phone repeats the digit,
you can speak the next digit.
If you pause, the phone prompts you with the
following five options. After the prompt, speak
an option.
– Say “

Clear

” to erase the last digit entered.

The phone responds: “Digit cleared.”
To clear the entire phone number, say

Clear

” again. When the phone prompts

you with “Clear entire phone number?”,
say “

Yes

to clear or “

No

” to cancel.

– Say “

Call

to dial the number.

– Say “

Verify

” to cause phone to repeat the

set of digits that you input.

– Say “

Cancel

” to exit voice recognizer and

return to the home screen.

– Speak a digit to enter the next digit. Once

the phone repeats the digit, you can speak
the next digit or pause to hear the prompt.

Using voice features with
hands-free car kits

You can use voice commands to make a phone
call or to answer the phone only if your phone is
connected to a Kyocera hands-free car kit
(sold separately).

Note:

The following features apply only to

installed hands-free car kits unless noted.

To shop for hands-free car kits, visit

www.kyocera-wireless.com/store

or call

800-349-4188 (U.S.A. only) or 858-882-1410.

Waking up the phone

If your phone is connected to a Kyocera hands-
free car kit, you can use the voice command to
activate the phone to make a phone call.

Note:

Voice Wake-up does not work with

Keyguard active.

To activate the Voice Wake-up setting:

1.

Select

Menu

Settings

Voice Features

Voice Wake-Up

With Accessory

.

82-N8758-1EN.book Page 59 Wednesday, May 10, 2006 2:01 PM

Advertising