Kawai CN31 - Manual (Page 43)

Page
43
FUNCTION B
UTT
ONS
5
In addition to the SOUND SELECT buttons, other button operations such as touch curve, dual, digital effects
and reverb settings can be transmitted as MIDI exclusive data when the corresponding buttons are pushed.
When set to off, no program change or other panel information will be transmitted via MIDI.
Step1
Hold down the TOUCH and TRANSPOSE buttons and press the DRAWBAR button.
The display will alternate between showing ‘PGM’ (Program) and on/off status. The default is on.
Step2
Use the VALUE buttons to toggle transmit program change on and off.
Program change numbers will also be transmitted when multi-timbral mode is on.
When using DUAL mode, on/off information and sound type settings are transmitted as exclusive data, but
program change numbers will not be transmitted.
The CN piano’s transmit program change setting defaults to ‘ON’ each time the power is turned on.
Hold down both buttons.
1
2
Transmit Program Change
OFF ON