Kawai CN31 - Manual (Page 50)

Page
50
APPENDICES
6
6. APPENDICES
‘ CONNECTING TO OTHER DEVICES
1 LINE OUT JACKS
These jacks provide stereo output of the CN31 piano’s sound to amplifi ers, tape recorders or similar equipment.
The audio signal coming through the LINE IN jacks is also routed to these jacks. The CN31 piano’s sound is
mixed with the LINE IN signals.
The CN31 piano’s VOLUME slider controls the output level of its own sound without affecting the level of the
LINE IN signal.
2 LINE IN JACKS
These jacks are used to connect a pair of stereo outputs from other audio equipment or electronic instruments
to the CN31 piano’s speakers. The audio signal coming through these jacks bypasses the CN31 piano’s volume
control. To adjust the volume level, use the output control of the external device.
3 MIDI JACKS
These jacks are used to connect external MIDI devices with the CN piano. There are two terminals: MIDI IN and
MIDI OUT.
4 PEDAL JACK
Connect the pedal cord from the pedal board to this jack.
5 HEADPHONE JACKS
There are two headphone jacks located on the left underside of the piano.
The piano's sound and any audio signal that is connected to the LINE IN jacks will be heard through the
headphones.
/
1 2 3 4 5
Amplifi ers, Speakers, or similar
equipment
Audio equipment or
electronic instruments
External MIDI devices
Pedal cable Headphones
Caution
y Do not directly connect the LINE IN and LINE OUT jacks of the CN31 together with a cable.
An audio loop (oscillation sound) will occur, resulting in damage to the unit.