Kodak 777 - Manual (Page 10)

10
Optimizing video images
After the video device is connected properly and the image is on the screen,
you can optimize the image using the onscreen menus. For general informa-
tion on using the menus, see page 11.
• Change the Aspect ratio. Aspect ratio is the ratio of the image width to
image height. TV screens are usually 1.33:1, also known as 4:3. HDTV
and most DVDs are 1.78:1, or 16:9. Choose the option that best fits your
input source in the menus, or press the Resize button on the remote to
cycle through the options. See page 12.
• Adjust the Keystone, Contrast, Brightness, Color, or Tint in the Picture
menu. See page 12.
• Select a different Color Temperature or use the Color Control to adjust
the gain and offset of the red, green, and blue color. See page 15.
• Select a specific Color Space or Gamma. See page 13 and page 15.
• Select a different Video Standard. Auto tries to determine the standard
of the incoming video. Select a different standard if necessary. See
page 15.
• Turn Overscan on to remove noise around the video image. See
page 13.
• Fine tune component inputs using the TrueLife™ adjustments. See
page 14.
• Tune colors to your specifications using Blue Only and ADC Calibra-
tion. See page 18.
• Make sure your DVD player is set for a 16:9 television. See your DVD
player’s user’s guide for instructions.
Customizing the projector
You can customize the projector for your specific setup and needs. See
page 16 to page 18 for details on these features.
• For rear projection, turn Rear mode on in the Settings>System menu.
• For ceiling mounted projection, turn Ceiling mode on in the Set-
tings>System
menu.
• Turn the projector’s display messages on and off.
• Turn on power saving features.
• Specify blank screen colors and startup logos. Make the menus translu-
cent.
• Specify the menu language.