Kodak 777 - Manual (Page 8)

8
Shutting down the projector
Power Save
The projector has a Power Save feature in the System menu that automati-
cally turns the lamp off after no signals are detected for 20 minutes. After 10
additional minutes with no signal, the projector powers down. If an active
signal is received before the projector powers down, the image is displayed.
You must press the Power button to display an image after 30 minutes have
passed.
Turning off the projector
To turn off the projector, press the Power button on the remote. The lamp
turns off and the LED blinks green for about one minute while the fans con-
tinue to run to cool the lamp. When the lamp has cooled, the LED lights
green and the fans stop. Unplug the power cable to completely power off
the projector.