Set the meters to display the post fader levels, Applying final (or mastering) effects and eq to, The entire song – KORG D3200 User Manual
Page 41
31
2. Applying Final (or mastering) effects and EQ to the entire song
Set the meters to display the post fader levels.
Press the METER key.
Click the popup button to open the “Meter/Track Type” dialog box.
Using the radio buttons, set the Meter Position to “Post Fader,” and set Select
View
to “Track View.” Now the meters will show the level for each fader.
Applying an effect to the master bus (Final Effect)
(1) Press the EFFECT key and select the “FinalEFF” tab page.
(2) Choose an effect category.
Click the popup button to open the Select EFF Category window, and select a
final effect category.
For this example select “Reverb&Delay.”
(3) Choose a final effect.
For this example click “Smooth Hall” and then click the OK
button (or press the panel YES key).
(4) Play back the song.
Press the PLAY key and listen to the output of the master
bus or the headphones to hear the results of the final effect.
(5) Make the desired adjustments, and then press the STOP
key.
For details on editing the parameters of the effect that you
selected, refer to “4. Editing the effects” (
ation section.
(2)
(1)
(2)
(1)
(3)
(3)