Kawai CP67 - Manual (Page 13)

– 13 –
ABOUT POLYPHONY
The CP piano is capable of playing up to 96 notes simultaneously (96-note
polyphony). When playing in dual mode or when playing the stereo piano
sound, the polyphony will be reduced by half since the piano has to produce
two sounds for each note.
(6) Reverb
-REVERB adds reverberation to the sound simulating the acoustic
environment of a recital room or concert hall.
There are six types of reverb in the CP67. They are Small Room, Medium
Room, Large Room, Medium Hall, Large Hall and Plate.
To add reverb to the sound, press the REVERB button. The LED
indicator will be turned on. If you hold down the REVERB button for
few seconds, the current setting will be shown in the display.
To change the reverb type, use the VALUE buttons while holding down
the REVERB button.
The reverb is “ON” when the LED of the REVERB button is lit.
Pressing the REVERB button once again turns the reverb “OFF”.
When the power is turned on, the reverb function is automatically activated.
(7) Effects
-Adding an effect to the sound enhances tonal quality and improves
acoustical realism.
There are twelve types of effect in the CP67. They are Chorus 1, Chorus
2, Chorus 3, Chorus 4, FB Chorus, Tremolo, Rotary 1, Rotary 2, Flanger,
Delay 1, Delay 2 and Delay 3.
To add an effect to the sound, press the EFFECTS button. The LED
indicator will be turned on and the LED display will show you which
effect is currently selected.
To change the effect type, use the VALUE buttons while holding down
the EFFECTS button.
Pressing the EFFECTS button once again turns the effect “OFF”.
Small Room Large Room Medium Hall Large Hall Plate Medium Room
Chorus 4 FB Chorus Flanger Delay 3 Tremolo Rotary 2